This site is not supported by your current browser.
Please use one of these browsers.
ADI Series
ADI’s series of gas compression stations are designed onto an easy-handling skid or enclosure composed of a single or multistage reciprocating block, belt-driven or direct-coupled by an electric motor inverter controlled.
Description
Adicomp – ADI Series
- Suction Pressure: Up to 233 psi(g)
- Operating Pressure: Up to 1450 psi(g)
- Free Gas Delivery: Up to 1059 SCFM
- Adsorbed Power: 20 < 270 hp
Main Applications
These gas compression stations are designed onto an easy-handling skid or enclosure composed of a single or multistage reciprocating block, belt-driven or direct-coupled by an electric motor inverter controlled.
Available with or without a gas treatment system, this series has been designed for the following main applications :
- Gas Grid Injection;
- Field Gathering;
- Vapor Recovery;
- CO2 Liquefaction.
How It Works
A single or double-acting horizontal reciprocating gas compressor is designed with one, two, or three conrods and several sizes of cast iron or forged cylinders to adapt to different solutions. It can be a single, double, or three-stage unit installed on an adequate steel structure.
Main scope of supply:
- Suction valve;
- Single or multi-stage reciprocating pump;
- Inter-stage and final air-cooled fan-assisted aftercooler;
- Coalescent type oil filter;
- Shut-off valves at suction and discharge;
- Safety valves at each stage;
- Electric motor IG3.
All necessary instrumentation is included in accordance with manufacturer standard. A proportional by-pass valve is used to recirculate the excess gas to reduce the flow rate from the value at minimum motor speed down to 0%.
